JVC SR-VS20EK, LPT0543-001A setup guide Remote Control LCD, How To Use

q– –:– – (DISPLAY) Button switches display between clock time, tape remaining time, counter readings and preset position*.  pg. 19

w* Preset position is not displayed during playback.

TV/VCR Button switches connected TV's mode ebetween TV and AV.  pg. 14, 17, 18

REVIEW Button "reviews" timer-recorded

rprogramme.  pg. 33

Button transmits entered the PlusCode tnumber to the recorder.  pg. 20

WEEKLY Button enables timer recording of yweekly serials.  pg. 21, 23

‰Button engages timer-standby mode. u pg. 21, 23

AUX Button selects recorder's auxiliary input imode.  pg. 44

oMENU Button accesses Menu screen.  pg. 11

Auto Tracking Button () enables/disables auto tracking mode during playback  pg. 30 SP/LP/EP Button selects tape speed.

p pg. 17, 18

OK Button enters selections made in on-screen Qmenus.  pg. 11

30 SEC Button initiates a 30-second period of Wfast-motion playback.  pg. 32

PR +/– Button — same as button on recorder. E pg. 17, 18

DATE +/– Button inputs date of programme for Rtimer recording.  pg. 22

Fast Forward [FF] Button fast-forwards tape; initiates high-speed forward search.  pg. 14,

T15

PAUSE Button — same as button on recorder.

Y pg. 15, 17, 18

@ # Button initiates functions such as Index Search  pg. 32, variable-speed search, frame by frame playback.  pg. 15

TV +/– Button controls volume of connected TV.  pg. 53

83

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ( pg. 53, 54)

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

NOTES:

●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.

Remote Control LCD

The remote control can operate not only the video recorder but also some of your TV and satellite receiver's functions. The LCD indicates which of these (VIDEO, TV or CABLE/SAT) the remote control can currently operate. When you first purchase the remote control, or after you have just replaced the batteries, VIDEO A (A code) is selected.1

To operate your video recorder, first press VHS or DV. To switch remote control's A/B/C/D code, refer to page

252.

To operate your TV, first press TV/CABLE/SAT until "TV"

3appears on the LCD ( pg. 53).

To operate your satellite receiver, first press TV/CABLE/ SAT until "CABLE SAT" appears on the LCD ( pg. 54).

NOTES:

Even if “TV” is displayed on the LCD, the following operations can be performed without switching the mode.

●Basic operations for the recorder

After an operation is completed, “TV” reappears on the LCD.

●Express Timer Programming and the VIDEO plus+ Timer Programming operations

To perform a TV operation again, switch to TV mode first.

●Accessing main menu

To perform a TV operation again, switch to TV mode first.