JVC SR-VS20EK, LPT0543-001A setup guide Recording

Recording

Turn on the TV and select the AV mode.

7	RECORD	5	7	EJECT
STOP			1

			PLAY			VHS
	PR	–			PAUSE	2
3,6		+/	5,6	6
					VHS record indicator

17

VHS Deck

LOAD A CASSETTE

1 Insert a VHS (or S-VHS) cassette with the record safety tab intact.

●The recorder power comes on automatically. The counter is reset to 0:00:00.

SELECT VHS DECK

2 Press VHS.

CHOOSE A PROGRAMME

Press PR +/– or the NUMBER keys to select the preset

3 you wish to record.

SET TAPE SPEED

Press SP/LP/EP ( ). Check the SP/LP/EP indicator on

4 the recorder display panel to confirm the selected tape

1

2

3,6

NUMBER

			VHS 2
			TV/VCR
1	2	3
4	5	6	3
7	8	9	4
			4
	0		SP/LP/EP 4

speed.

● In EP mode, the recording time is extended three times.

● If you record a programme in EP mode on this

recorder, it is recommended that you play back the

EP-recorded tape on this recorder.

● Picture quality of LP/EP recordings will not be as high

as on SP recordings.

START RECORDING

Press and hold RECORD and press PLAY on the remote

5 control, or press RECORD on the recorder. The VHS

	1		3
	2			3,6
			PR+/–
5,6	PLAY	STOP	7
			PAUSE	6
5 RECORD

INFORMATION

You can switch between TV mode and AV mode by pressing TV/VCR.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Accidental erasure prevention

VHS/S-VHS

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

	record indicator ( ) lights.
	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP (or EP) recording after
	inserting the cassette.
	If "DIRECT REC" is set to "ON", the programme
	that appears on the TV screen will be recorded
	( pg. 11). (Only with a TV offering T-V Link)
	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 6.
6	PAUSE/RESUME RECORDING
	Press PAUSE. Press PLAY to resume recording.
	● During the Record Pause mode, you can change the
	preset by pressing the PR +/– buttons or the NUMBER
	keys.
	STOP RECORDING
	Press STOP. The VHS record indicator ( ) goes off.
	Then press EJECT on the VHS deck to remove the
7 cassette.