QUESTIONS AND ANSWERS

Q: I can neither release the shutter even by press- ing the shutter release button, nor advance the film. Why?

A: Because no batteries are loaded. Load fresh batteries.

Q: Why is the field of view dark and the image obscure?

A: Because the batteries are exhausted. Replace them.

Q : Why can't I move the film advance lever?

A: The self-timer may be set, or the shutter re- lease may be cocked and ready but it has not been pressed yet. If you press the shut- ter release button, film will advance to the next frame. Has the film reached its end? Check the exposure counter and, if it shows that the film has ended, rewind the film. Are the alkaline-manganese or silver oxide bat- teries charged? Check the batteries, and if you hear the beeping sound and see the red light flashing, but cannot move the lever,

take your camera to an authorized OLYM- PUS Service Center.

Q : Why doesn't the rewind knob rotate when I

try to advance the film?

A : The film leader is not properly engaged on

the film take-up spool. Insert the film leader again.

Q : Why won't the rewind crank turn?

A : Set the rewind release lever once more in the direction of the arrow, and the problem

will be solved.

Q : Is infrared photography also possible with the OM-10?

A: Yes, it is if you use the manual adapter and set the mode selector lever to the MANUAL

ADAPTER position. Then, take the follow- ingsteps: Focus without a filter. Move the focusing ring to coincide with the infra-

red mark. Mount a filter for infrared photo- graphy, and proceed to take the picture.

Q: When should I check the batteries? A : When new batteries are inserted.

After the camera has been stored for a

long time.

When you think batteries may be ex- hausted.

The alkaline-manganese batteries should

45

Page 46
Image 46
Olympus OM-10 Questions and Answers, Why is the field of view dark and the image obscure?, Why wont the rewind crank turn?