JVC SR-VS20EK, LPT0543-001A setup guide Scenes, Engage VHS Deck to, Pause, Press R.A.EDIT

VHS

DV

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

PLAY

PAUSE

RECORD

NOTES:

●When Random Assemble Editing doesn't work, press → beside the DUB button, then perform Random Assemble Editing again.

●To cancel the registered scene, press . Each time is pressed, the latest registered scene is erased.

●When the source tape has more than 2 identical time codes ( pg. 16), the recorder may not find the edit-in point you chose and a malfunction may occur.

●When choosing a scene, set edit-in and edit-out points so that there's a relatively large difference between them.

●If the search time for an in-point exceeds 5 minutes, the recording deck's Record-Pause mode will be cancelled and editing will not take place.

●If there are blank portions before or after the edit-in and edit- out points, a blue-backed screen may be included in the edited version.

●Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●To quit Random Assemble Editing while it is still in progress, press R.A.EDIT again to return to the R.A.EDIT screen. Press R.A.EDIT once more to return to the normal screen.

●To use Random Assemble Editing consecutively for two or more programmes, press START for each programme.

When dubbing from another Mini DV cassette, swap the Mini DV cassettes first, and then press START.

						41
6	LOCATE EDIT-OUT POINT
	Press PLAY to start	P1	IN		OUT
	playback. Find the point
		1	0 : 3 1 : 0 2	→ 0 : 5 4 : 0 0
	where you want the edited	2		→
		3		→
	scene to end, then press	4		→
	PAUSE.	5		→
	Then, press IN/OUT. The	6		→
		7		→
	edit-out point appears on	8		→
	the screen.			TC		0 : 0 0 : 1 0
				TOTAL		0 : 2 2 : 5 8
	REGISTER ADDITIONAL
7	SCENES
	Repeat steps 5 and 6.
	● To change previously registered points, press					. The
	registered points disappear, one at a time, from the
	most recently registered point.
8	PREPARE SOURCE TAPE
	Rewind the tape in the DV deck to the beginning of the
	scene you want to edit.
	ENGAGE VHS DECK TO
9	RECORD-PAUSE MODE
	Press VHS, then press and hold PAUSE and press
	RECORD so that the VHS deck enters the Record-Pause
	mode.
10	START EDITING
	Press START.
	● When dubbing is complete, the DV deck enters the
	Pause mode, and the VHS deck enters its Record-
	Pause mode.
11	STOP EDITING
	Press STOP. The VHS deck stops playback.
	Press DV, then press STOP. The DV deck stops
	recording.
	RETURN TO NORMAL
12	SCREEN
	Press R.A.EDIT.