JVC LPT0543-001A, SR-VS20EK setup guide Video Plus+ Timer Programming

20BASICOPERATIONS (cont.)

VIDEO Plus+®

Timer

Programming

Before performing the VIDEO Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Select the recording deck by pressing VHS or DV.

●Insert a VHS (or S-VHS) cassette with the safety tab in place, or a Mini DV cassette with the erase protection switch set to "REC".

●Turn on the TV and select the AV mode.

LCD panel

	DV		VHS
		DAILY
	1
LCD PROG	2
	1	2	3
NUMBER	4	5	6	3
	7	8	9
PDC				4
				4
		0		SP/LP/EP
	1		3	OK
PROG	2
			STOP+/–

You can use the remote control with LCD panel to enter the PlusCode number.

1	SELECT DECK
	Press VHS or DV.
2	ACCESS VIDEO PLUS+ DISPLAY
	Press LCD PROG.
	The LCD panel looks like this:
3	ENTER PLUSCODE NUMBER
	Press the NUMBER keys to enter the PlusCode number of
	a programme you wish to record, then press .

● If you make a mistake, press and input the correct number. The PlusCode number you enter appears on the LCD panel:

Then go to step 4 in the right column.

With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

Perform step 1 in the left column.

ACCESS VIDEO PLUS+ SCREEN

2	Press PROG.		VIDEO PLUS+
		[0 – 9] = VIDEO PLUS+
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	VIDEO PLUS+
enter the PlusCode
	1 2 3 4 5 6 7 8
3 number of the programme
you wish to record, then
press OK.

●If you make a mistake,

press and input the	[0 – 9] =
correct number.	[ ] : DELETE
	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PROGRAM SCREEN

	The VIDEO Plus+ Program				VHS – P1 –
	screen appears (if you’re			VIDEO PLUS+ 123456789
4 just starting out, “P1”				START	STOP
			21:00		= 22:00
	appears).			SP	VPS/PDC OFF
	The display panel shows the			DATE	TV PROG
	programme start time.		25.12		1
	Pressing	changes the			BBC 1
	display to the programme			: OK
	stop time, then the date and
	preset position.
		SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "VIDEO Plus+® system Setup" on page 73 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 21.