JVC LPT0543-001A Locate END Point, VHS Insert Editing, DV Insert Editing SP Mode Only

48ADVANCEDOPERATIONS (cont.)

Insert Editing

Recorder Your recorder

VHS Insert Editing

Insert Editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

ATTENTION:

Insert editing is not possible with a cassette recorded in EP mode.

Source tape

Audio/Video	S-video signal
signal
Another recorder

Player

VHS

DV
1
2
1	2	3
4	5	6	3
7	8	9	4
			4

NUMBER "0"	0
1	3
2

PR

PAUSE

NOTES:

●Insert Editing is not possible with a Mini DV tape recorded in LP mode.

●To use the DV deck as the recording deck, press ← and then

DV after selecting "F-1" in step 3. The dubbing direction (← VHS) indicator lights.

	Before insert editing	Normal
Recorded tape		Audio track
	After insert editing
		Video/Hi-Fi
		audio track

DV Insert Editing

(SP Mode Only)

The picture is replaced with new one, while the audio soundtrack remains unchanged.

Use your video recorder as the recorder.

1	MAKE CONNECTIONS
	Connect the player's VIDEO OUT or S-VIDEO OUT
	and AUDIO OUT connectors to your recorder's VIDEO
	or S-VIDEO and AUDIO input connectors on the front
	panel.
2	SELECT RECORDING DECK
	Press VHS.
	SET RECORDER’S INPUT
3	MODE
	Press NUMBER key "0" and/or PR to select "F-1".
	● When using the VHS deck as the recording deck, set
	"VHS F-1 INPUT" to "VIDEO" for the AUDIO/VIDEO
	input connectors, or "S-VIDEO" for the AUDIO/S-
	VIDEO input connectors, depending on the connec-
	tors being used ( pg. 51).
	LOCATE END POINT
4	(VHS DECK ONLY)
	Load the recording cassette into your recorder, and play
	it back to determine the edit-out point (the end of the
	segment to be	replaced) using the SHUTTLE ring or the
			@#	and PAUSE.
	JOG dial, or pressing