JVC SR-VS20EK, LPT0543-001A Link Functions, Turn on the Recorder, NexTView Link, TV Auto Power On

T-VLINK

11

T-V Link

Functions

When you connect the recorder and your TV via a fully-wired 21-pin SCART cable ( pg. 6), the following functions are available. You can use these functions only with a TV offering T-V Link, etc.*

For details, refer to the instruction manual for your TV.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully- wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

NexTView Link

You can download the EPG (Electronic Programme Guide) information from your TV for timer-programming on the recorder.

For details, refer to the instruction manual for your TV.

TV Auto Power On

You can turn on the TV and set it to video mode automatically whenever you play a tape.

For details, refer to the instruction manual for your TV.

NOTE:

"TV Auto Power On" of T-V LINK functions is not possible with the DV deck.

VCR Auto Standby

You can use your TV's remote control to turn off the recorder. For details, refer to the instruction manual for your TV.

Direct Rec

You can start recording the programme that you are watching on your TV with simple operation. Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder.

Follow the procedure below to use this function.

TURN ON THE RECORDER

1 Press		.
	ACCESS MAIN MENU
	SCREEN
2 Press MENU.
	ACCESS MODE SET
	SCREEN
	Press %fi to move the		MAIN MENU
	highlight bar (pointer) to
3 "MODE#SET", then press			MODE SET	SET
			VHS MODE
	OK or .		DV MODE SET
			AUTO CH SET
			MANUAL CH SET
			OUTPUT/INPUT SET
			INITIAL SET
			[5∞] =
			[MENU] : EXIT
	SELECT DIRECT REC MODE
	Press %fi to move the		MODE SET
	highlight bar (pointer) to		S-VHS/AUDIO OUT		AUTO
	"DIRECT REC", then press
			O. S. D.		ON
4 OK or # to set to "ON".			AUTO TIMER		OFF
			DIRECT REC		ON
			POWER SAVE		OFF
			[5∞] =
			[MENU] : EXIT
	RETURN TO NORMAL
	SCREEN
5 Press MENU.

NOTES:

●If "DIRECT REC" is set to "OFF", the RECORD button functions as described in "Recording" ( pg. 17, 18) .

●During the Direct Rec, "– –" appears on the display panel.

●When you perform T-V LINK functions, be sure to use a fully- wired 21-pin SCART cable.

●Retake function does not work during Direct Rec ( pg. 58).

●Direct Rec is not possible with a scrambled broadcast.

●To record a scrambled broadcast, set "DIRECT REC" to "OFF" and follow the procedure described in "Recording" on page 17, 18.