JVC SR-VS20EK, LPT0543-001A Engage S-VHS ET Mode, Press S-VHS ET on the recorder. You can check

		S
		-
PLAY	RECORD	VHS
		ET

1

2

1	2	3
4	5	6	3
7	8	9	4
			4
	0

1	3
2

PLAY

RECORD

27

Super VHS ET (S-VHS ET)

—Recording on VHS tapes with S-VHS quality

(VHS deck Only)

This function allows you to record in SP mode on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back on a recorder equipped with the S-VHS ET function.

●You can activate this function only before you start recording on a VHS tape.

●Before recording, make sure that "B.E.S.T." is set to "ON". ( pg. 28)

1	ENGAGE S-VHS ET MODE
	Press S-VHS ET on the recorder. You can check the
	current setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if
	"O.S.D." is set to "ON" ( pg. 55). If "S-VHS ET : OFF"
	appears on the TV screen, press S-VHS ET again in
	about 5 seconds to set it to "ON".
	● The S-VHS indicator lights up on the front display panel.
2	START RECORDING
	Press and hold RECORD and press PLAY on the remote
	control, or press RECORD on the recorder.

NOTES:

●Use of high grade tapes is essential for S-VHS ET record- ings. On some tapes, picture quality will not improve even if the S-VHS ET function is used. Check the record- ing quality before you start important recordings.

●You cannot activate the S-VHS ET function ...

... while recording is in progress.

... while timer-recording or Instant Timer Recording ( pg. 19) is in progress.

... while B.E.S.T. ( pg. 28) is in progress.

●S-VHS ET does not work ...

... with S-VHS tapes.

... with recordings in LP/EP mode.

●To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording on S-VHS tapes is recommended.

●You can play back S-VHS ET recordings on most S-VHS recorders and on VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice: some recorders are not compatible with this function.)

●On some tapes noise may appear when playing back a tape recorded with this function. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)

●In the high-speed search, still, slow-motion or frame-by-frame playback modes ( pg. 15), noise may appear. If these modes are used frequently on a tape recorded with the S-VHS ET function, the tape may be damaged and the picture may be deteriorated.