JVC SR-VS20EK, LPT0543-001A setup guide Review

DISPLAY1PANEL2 3456 7 8

81

		SP			REVIEW
9			@	#	$
VPS/PDC	0		VCR!

1B.E.S.T. Picture System Display lights from

2bottom to top while B.E.S.T. is active.  pg. 28

Symbolic Mode Indicators

	STILL:
PLAY:	SLOW:
FF/REW VARIABLE	RECORD:
SEARCH:
	RECORD PAUSE:

AUDIO DUBBING:

AUDIO DUBBING PAUSE:

INSERT:

INSERT PAUSE:

AV INSERT:

AV INSERT PAUSE:

3Tape Speed Indicators display mode of recording; light during Record or Play mode.

4 pg. 17, 18

Programme Time Indicators show the

programme start time () and the programme

5stop time () for timer-recording.  pg. 22 "Timer" Indicator lights when ‰ has been

6pressed to engage Timer mode.  pg. 21, 23 Tape Remaining Time Indicator displays time remaining on tape when certain buttons are pressed.  pg. 19

7Channel Display shows preset position where the station currently being received is stored.

8Clock Display shows current time.  pg. 10 Instant REVIEW Indicator blinks after timer- recording and shows how many programmes

9have been timer-recorded.  pg. 33 PDC Indicator lights when PDC has been engaged for timer recording.  pg. 21, 23

*VPS (Video Programme System) recording is not currently

0available in the U.K. and not possible with this recorder.

S-VHS Indicator lights when a cassette marked S-VHS is inserted with S-VHS mode set to "ON", when an S-VHS-recorded tape or S-VHS ET- recorded tape is played back or when S-VHS ET

!mode is engaged.  pg. 26

VCR Indicator lights when the video recorder is in the video mode. At this point, the TV auto-

@matically enters AV mode.  pg. 14 "Cassette Loaded" Mark lights once a cassette is

#inserted; remains lit until cassette ejected. Counter shows time elapsed since playback or recording began.

With displayed, shows time remaining from current tape position to end of tape ( pg. 19). Counter, Preset Position*, Clock and Tape Remaining Time Display appear alternately when – –:– – (DISPLAY) is pressed.

$*Preset Position is not displayed during playback.

Mode shows external input mode selected (L-1, L-2, F-1 or SAT).