JVC LPT0543-001A, SR-VS20EK setup guide Storing Channels Manually

[0–9] : SELECT

[∞ ∞] : CURSOR +=

: OK [MENU] : EXIT

The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.

66

SUBSIDIARYSETTINGS (cont.)

	1
	2
	1	2	3
NUMBER	4	5	6	3
	7	8	9
				4
				4
		0		MENU
	1		3	OK
	2

Storing Channels Manually

To store channels that were not stored during Auto Set Up ( pg. 8), Preset Download ( pg. 9) or Auto Channel Set ( pg. 64).

1	ACCESS MAIN MENU
	Press MENU.
	ACCESS CONFIRMATION
2	SCREEN
	Press %fi to move the highlight bar (pointer) to
	“MANUAL CH SET”, then press OK or #. The Confir-
	mation screen appears.
3	SELECT POSITION
	Press %fi @# until an	(Ex.) To store in position 6.
	open position in which			PR	CH	ID	PR CH	ID
	you want to store a
		01			26	BBC1	08	– – – –
	channel begins blinking,	02			33	BBC2	09	– – – –
	then press OK. The Manual	03			23	ITV	10	– – – –
		04			30	CH4	11	– – – –
	Channel Set screen	05			37	CH5	12	– – – –
	appears.		06			– – – –	13	– – – –
		07				– – – –	14	– – – –
				[5∞5 5]
				=		: EDIT
				= [X] : DELETE
				[MENU] : EXIT
	The blueback screen and the
	programme currently being
	broadcast by the selected channel
	appear alternately for 8 seconds
	each.

	SELECT BAND
	Press %fi to change the
	band between CH (regular)
	and CC (cable), then			PR	CH	ID	FINE DECODER
4 press #.				06	CH01 – – – –		+/–	OFF
				[5∞] : SELECT
				[∞ ∞] : CURSOR +=
					: OK
				[MENU] : EXIT
		The blueback screen and the
		programme currently being
		broadcast by the selected channel
		appear alternately for 8 seconds
		each.
	INPUT CHANNEL
	Press the NUMBER keys to
	input the channel number
5 you want to store.				PR	CH	ID	FINE DECODER
			06		CH21 – – – –		+/–	OFF

●To input the registered station name (ID – 

pg. 70), press # until "– – – –" (ID setting) begins blinking, then press %fi.

● For fine tuning adjustment, press # until "+/–" begins blinking, then press %fi. While tuning, "+" or "–" appears.

●When "L-2 SELECT" is set to "A/V" or "SAT", the "DECODER" setting cannot be changed ( pg. 50).

ENTER NEW CHANNEL

INFORMATION

6 Press OK and the Confirmation screen appears.

●Repeat steps 3 through 6 as necessary.

CLOSE CONFIRMATION SCREEN

7 Press MENU.

●To change positions, see "Change Station Preset Position" ( pg. 67).

●If you wish to set station names other than the ones registered in your recorder,  "Set Stations (B)" on page 69.

ATTENTION

Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer program- ming with the VIDEO Plus+ system in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen.  “ATTENTION – Regarding Guide Program Number Set” on page 21.

Or perform “Guide Program Number Set” ( pg. 73).