Lexmark C925, 24Z0000, 030 Understanding printer menus 114, Advanced Status, Protocol, Honor Init

Understanding printer menus		114
	Menu item	Description
	Job Buffering	Temporarily stores print jobs on the printer hard disk before printing
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers print jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Advanced Status	Enables bidirectional communication through the parallel port
	On	Notes:
	Off
		• On is the factory default setting.
		• Off disables parallel port negotiation.
	Protocol	Specifies the parallel port protocol
	Fastbytes	Notes:
	Standard
		• Fastbytes is the factory default setting. It provides compatibility with most
		existing parallel ports and is the recommended setting.
		• Standard tries to resolve parallel port communication problems.
	Honor Init	Determines if the printer honors printer hardware initialization requests from the
	Off	computer
	On	Notes:
		• Off is the factory default setting.
		• The computer requests initialization by activating the Init signal from the
		parallel port. Many personal computers activate the Init signal each time the
		computer is turned on.
	Parallel Mode 2	Determines if the parallel port data is sampled on the leading or trailing edge of a
	On	strobe
	Off	Note: On is the factory default setting.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	On
		• Auto is the factory default setting.
	Off
		• Off filters print jobs using the standard protocol.
		• On processes raw binary PostScript print jobs.
	ENA Address	Sets the network address information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Sets the netmask information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.