Lexmark 030, C925, 24Z0000 manual Set Date and Time menu, Understanding printer menus 122

Understanding printer menus		122
	Menu item	Description
	Configure Log	Specifies whether and how audit logs are created
	Enable Audit	Notes:
	No
		• Enable Audit determines if events are recorded in the secure audit log and
	Yes
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
		syslog server. 4 is the factory default setting.
	0–23
		• With the security audit log activated, the severity value of each event is
	Severity of events to log
		recorded. 4 is the factory default setting.
	0–7
Set Date and Time menu
	Menu item	Description
	Current Date and Time	Shows the current date and time settings for the printer
	Manually Set Date and Time	Notes:
	[input date/time]	• Date and Time is set in YYYY-MM-DD HH:MM format.
		• Manually setting the date and time sets Enable NTP to Off.
	Time Zone	Note: GMT is the factory default setting.
	[list of time zones]
	Automatically observe DST	Note: On is the factory default setting. This uses the applicable Daylight Saving
	On	Time associated with the Time Zone setting.
	Off
	Enable NTP	Enables Network Time Protocol, which synchronizes the clocks of devices on a
	On	network
	Off	Notes:
		• On is the factory default setting.
		• The setting is turned off if you manually set the date and time.