Lexmark C925, 24Z0000, 030 manual Standard USB menu, Understanding printer menus 111, Set Zone

Understanding printer menus		111
	Menu item		Description
	Set Zone		Provides a list of AppleTalk zones available on the network
	[default]		Note: When “default” is selected, the printer uses the AppleTalk zone that the
	[list of zones available on the network]		router identifies as the default zone for the network. If no default zone exists,
			then the zone marked with an * is the default setting.
Standard USB menu
	Menu item	Description
	PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job received
	On	through a USB port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
			PostScript emulation if the PS SmartSwitch is set to On. It uses the default
			printer language specified in the Setup menu if the PS SmartSwitch is set to
			Off.
	PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job received
	On	through a USB port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
			PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
			language specified in the Setup menu if the PCL SmartSwitch is set to Off.
	NPA Mode	Sets the printer to perform the special processing required for bidirectional
	Auto	communication following the conventions defined by the NPA protocol
	On	Notes:
	Off	• Auto is the factory default setting. Auto sets the printer to examine data,
			determine the format, and then process it appropriately.
		• Changing this setting from the printer control panel and then exiting the
			menus causes the printer to restart. The menu selection is then updated.