Lexmark C925, 24Z0000, 030 manual Smtp Setup menu, Understanding printer menus 117, Menu item Baud

Understanding printer menus 117

Menu item Baud

9600

19200

38400

57600

115200

138200

172800

230400

345600

1200

2400

4800

Data Bits

8

7

Parity

None

Ignore

Even

Odd

Honor DSR

Off

On

Description

Specifies the rate at which data can be received through the serial port

Notes:

•9600 is the factory default setting.

•138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specifies the number of data bits sent in each transmission frame

Note: 8 is the factory default setting.

Sets the parity for serial input and output data frames

Note: None is the factory default setting.

Determines whether the printer uses the DSR Signal

Notes:

•Off is the factory default setting.

•DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Menu item	Description
Primary SMTP Gateway	Specifies SMTP server gateway and port information
	Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout	Specifies the amount of time in seconds before the server stops trying to
5–30	send an e‑mail
	Note: 30 seconds is the factory default setting.
Reply Address	Specifies a reply address of up to 128 characters in the e-mail sent by the
	printer