Lexmark 24Z0000, C925, 030 manual Serial x menu, Understanding printer menus 115

Understanding printer menus		115
	Menu item	Description
	ENA gateway	Sets the gateway information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
Serial [x] menu
	Menu item	Description
	PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
		PostScript emulation if PS SmartSwitch is set to On. It uses the default printer
		language specified in the Setup menu if PS SmartSwitch is set to Off.
	PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
		PCL emulation if PCL SmartSwitch is set to On. It uses the default printer
		language specified in the Setup menu if PCL SmartSwitch is set to Off.
	NPA Mode	Sets the printer to perform the special processing required for bidirectional
	Auto	communication following the conventions defined by the NPA protocol
	On	Notes:
	Off	• Auto is the factory default setting. Auto sets the printer to examine data,
		determine the format, and then processes it appropriately.
		• When set to On, the printer performs NPA processing. If the data is not in NPA
		format, it is rejected as bad data.
		• When set to Off, the printer does not perform NPA processing.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.