Xerox 3200MFP manual Mode Recommended for

You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see Storing a Number for Speed Dialing on page 8-13.

5. Press Start.

6. When a document is placed on the document glass, the display shows “Another Page?” on the top line after the document is scanned into the memory. If you have the next page, remove the scanned page and place

Xerox Phaser 3200MFP

Enter the remote fax phone number using the number keypad.

4.

NOTE: For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

When your machine is set to Super Fine resolution and the receiving fax machine does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine.

Sending a Fax Automatically

1. Load the document(s) face up into the ADF, or place a single document face down on the document glass.

For details about loading a document, see Loading a Document on page 8-4.

2. Press the Fax button.

3. Adjust the document resolution to suit your fax needs (see Adjusting the Document Resolution on page 8-5).

If you need to change the brightness, see Lighten/Darken on page 8-2.

8 Faxing

The document types recommended for the resolution settings are described in the table below:

Mode	Recommended for:
Standard	Documents with normal sized characters.
Fine	Documents containing small characters or thin lines or
	documents printed using a dot-matrix printer.
Super Fine	Documents containing extremely fine detail. Super Fine mode
	is enabled only if the machine with which you are
	communicating also supports the Super Fine resolution. See
	the notes below.
Photo	Documents containing shades of gray or photographs.
Color	Documents with colors. Sending a color fax is only possible if
	the receiving machine supports color fax reception and you
	send the fax manually. In this mode, memory transmission is
	not available.

8-6