9 Maintenance

2. Pull the print cartridge out and remove it from the printer.

3. Thoroughly shake the print cartridge from side to side five or six times to redistribute the toner.

NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

CAUTION: Do not touch the green underside of the print cartridge.

Use the handle on the cartridge to avoid touching this area.

4.Reinstall the cartridge and close the front door. Make sure that the cover is securely closed. If it is not firmly closed, printing error may occur.

Replacing the Print Cartridge

When the display on the control panel shows the warning message, “Toner Empty” the print cartridge has run and the machine stops printing. At this stage, the print cartridges needs to be replaced.

Remove the old print cartridge and install a new print cartridge. See Installing the Print Cartridge on page 2-4.

Xerox Phaser 3200MFP

9-7

Page 183
Image 183
Xerox 3200MFP manual Replacing the Print Cartridge, Use the handle on the cartridge to avoid touching this area