6 Printing

Using Your Machine with a Macintosh (Phaser 3200MFP/N only)

Your machine supports Macintosh systems with a built-in USB interface or a 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the PostScript driver by installing the PPD file.

Installing Software for Macintosh

The PostScript driver CD-ROM that came with your machine provides you with the PPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintosh computer.

Also, it provides you with the TWAIN driver for scanning on a Macintosh computer.

Verify the following before you install the printer software:

Item

Requirements

 

 

Operating System

Mac OS 10.3 ~ 10.4

 

 

RAM

128 MB

 

 

Free Disk Space

200 MB

 

 

Install the Printer driver

1.Connect your machine to the computer using the USB cable or the Ethernet cable.

2.Turn on your computer and the machine.

3.Insert the PostScript driver CD-ROM which came with your machine into the CD-ROM drive.

4.Double-click the Xerox MFP on your Macintosh desktop.

5.Double-click the MAC_Installer folder.

6.Double-click the MAC_Printer folder.

7.Double-click the Xerox Phaser 3200MFP_OSX icon.

8.Click Continue.

9.Click Install.

10.After the installation is finished, click Quit.

6-46

Xerox Phaser 3200MFP

Page 126
Image 126
Xerox manual Using Your Machine with a Macintosh Phaser 3200MFP/N only, Installing Software for Macintosh, Requirements