Xerox manual Common PostScript Problems Phaser 3200MFP/N Only

10 Troubleshooting

Common PostScript Problems (Phaser 3200MFP/N Only)

The following situations are PS language specific and may occur when several printer languages are being used.

NOTE: To receive a printed or screen-displayed message when PostScript errors occur, open the Print Options window and click the desired selection next to the PostScript errors section

Condition	Suggested solutions
PostScript file cannot	The PostScript driver may	• Install the PostScript
be printed.	not be installed correctly.	driver.
		• Print a configuration page
		and verify that the PS
		version is available for
		printing.
		• If the problem persists,
		contact a service
		representative.
“Limit Check Error”	The print job was too	You might need to reduce
message appears.	complex.	the complexity of the page
		or install more memory.
A PostScript error page	The print job may not be	Make sure that the print job
prints.	PostScript.	is a PostScript job. Check
		to see whether the software
		application expected a
		setup or PostScript header
		file to be sent to the
		machine.
When print a document	The resolution setting in the	Make sure that the
in Macintosh with	printer driver may not be	resolution setting in your
Acrobat Reader 6.0 or	matched with that in	printer driver matches that
higher, colors print	Acrobat Reader.	in Acrobat Reader.
incorrectly.

10-26 Xerox Phaser 3200MFP