Xerox 3200MFP manual Dialing on, Fuser Area or Around, Paper Exit Area. on

		10 Troubleshooting
Display	Meaning	Suggested Solutions
Not Assigned	The speed dial location	Dial the number manually using
	you tried to use has no	the number keypad or assign
	number assigned to it.	the number. For storing a
		number, see Automatic
		Dialing on page 8-13.
	The ID you entered is	Enter the correct ID. .
	not assigned.
No Paper	The paper in the tray	Load paper in the tray. See
Add Paper	has run out.	Loading Paper on page 2-6.
Operation	You are doing the Add/	Check the display to see if there
Not Assigned	Cancel operation, but	are any scheduled jobs. The
	there are no jobs	display should indicate them in
	waiting.	Standby mode; for example,
		Delay Fax.
Out of Range	The current date and	Enter the correct date and time.
	time you entered is not
	correct.
Open Front Door	Paper has jammed in	Clear the jam. See In the Tray
Remove Paper	the feeding area of the	on page 10-4.
	tray	Clear the jam. See In the
	Paper has jammed in	Fuser Area or Around the
	the fuser area or around	Print Cartridge on page 10-5.
	the print cartridge.
Open Rear Cover	Paper has jammed in	Clear the jam. See In the
Remove paper	the paper exit area.	Paper Exit Area. on page 10-
		6.
Power Failure	Power has turned off	The job which you were trying to
	then on and the	do before the power failure
	machine’s memory has	must be completely re-done.
	not been saved.
Remove Documents	The Favorite Copy	The Clone, Autofit, ID Card
from ADF	button is set to Clone,	Copy or Poster feature does not
	Autofit, ID Card Copy or	work with ADF. Remove the
	Poster and you press	documents in the ADF.
	the button.
Retry Redial?	The machine is waiting	You can press Enter to
	for a specified time	immediately redial, or Stop/
	interval to redial a	Clear to cancel the redial
	previously busy station.	operation.
Scanner Locked	The scanner module is	Unplug the power cord and plug
	locked.	it back in.

Xerox Phaser 3200MFP 10-11