Xerox 3200MFP manual Clearing LCD Error Messages, Display Meaning Suggested Solutions

10 Troubleshooting

Clearing LCD Error Messages

Display	Meaning	Suggested Solutions
Cancel?	Your machine’s memory	To cancel the fax job, press the
1:Yes 2:No	has become full while	1 button to accept “Yes”.
	trying to store a	If you want to send the pages
	document into memory.	that have been successfully
		stored, press the 2 button to
		accept “No”. You should send
		the remaining pages later, when
		memory is available.
Comm. Error	The machine has a	Ask the sender to try again.
	communication
	problem.
CRU Fuse Error	The print cartridge is	Install the print cartridge
	not installed correctly.	correctly. See Installing the
		Print Cartridge on page 2-4.
Document Jam	The loaded document	Clear the document jam. See
Remove&Reload	has jammed in the ADF	Clearing Document Jams on
	(Automatic Document	page 10-2.
	Feeder).
Front or Rear	The front door or rear	Close the door until it locks into
Cover Open	cover is not securely	place.
	latched.
Enter Again	You entered an	Enter the correct item again.
	unavailable item.
Low Heat Error	There is a problem in	Turn power off and wait 10
	the fuser unit.	seconds. Turn power on. If the
Open Heat Error
		problem persists, call for
		service.
Over Heat
Group Not	You have tried to select	Use a speed dial number or dial
Available	a group location	a number manually using the
	number where only a	number keypad.
	single location number
	can be used, such as
	when adding locations
	for a broadcast
	operation.

Xerox Phaser 3200MFP 10-9