Xerox 3200MFP manual Paper Specifications, Category Specifications

		11 Specifications
Symptom	Problem with Paper	Solution
Excessive curl problems	Too moist, wrong grain	Use long-grain paper.
with feeding	direction or short-grain
	construction
Jamming, damage to	Cutouts or perforations	Do not use paper with
machine		cutouts or perforations.
Problems with feeding	Ragged edges	Use good quality paper.

NOTE:

•Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The machine uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (392 °F or 200 °C for 0.1 second).

Paper Specifications

Category	Specifications
Acid content	5.5 pH or lower
Caliper	3.0 ~ 7.0 mils (0.094 ~ 0.18 mm)
Curl in ream	Flat within 0.02 in. (5 mm)
Cut edge conditions	Cut with sharp blades with no visible fray.
Fusing compatibility	Must not scorch, melt, offset or release
	hazardous emissions when heated to 392 °F
	(200 °C) for 0.1 second.
Grain	Long grain
Moisture content	4 % ~ 6 % by weight
Smoothness	100 ~ 400 Sheffield

Xerox Phaser 3200MFP 11-9