Xerox 3200MFP manual Common Windows Problems, Selecting Print Materials on

	10 Troubleshooting
Condition	Suggested solutions
Blank areas appear at	You may have chosen the wrong paper settings in the
the bottom of each	user option setting. For details about paper settings, see
page or on other	Selecting Print Materials on page 4-2.
pages, with a small
strip of text at the top.

Common Windows Problems

Condition	Suggested solutions
“File in Use”	Exit all software applications. Remove all software from
message appears	the StartUp Group, then restart Windows. Reinstall the
during installation.	printer driver.
“Error Writing to	• Ensure that the cables are connected correctly, and
LPTx” message	that the machine is switched on.
appears.	• If bi-directional communication is not turned on in the
	driver, it will also cause this message.
“General Protection	Close all other applications, reboot Windows and try
Fault”, “Exception	printing again.
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
“Fail To Print”, “A	These messages may appear during printing. Just keep
printer timeout error	waiting until the machine finishes printing. If the
occurred.” messages	message appears in standby mode or after printing has
appear.	been completed, check the connection and/or whether
	an error has occurred.
“File in Use”	Exit all software applications. Remove all software from
message appears	the StartUp Group, then restart Windows. Reinstall the
during installation.	printer driver.

NOTE: Refer to Microsoft Windows 98/Me/2000/XP(32/64bit)/2003(32/ 64bit)/Vista User’s Guide that came with your PC for further information on Windows error messages.

Xerox Phaser 3200MFP 10-25