6 Printing

Using Windows PostScript Driver (Phaser 3200MFP/N Only)

PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the supplied software CD-ROM.

This chapter includes:

Printer Settings

You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job.

Your printer properties window may differ, depending on your operating system. This User’s Guide shows the Properties window for Windows XP.

Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use.

NOTE:

Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver.

The settings you change remain in effect only while you are using the current program. To make your changes permanent, make them in the Printers folder.

The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help.

1)Click the Windows Start button.

2)Select Printers and Faxes.

3)Select your printer driver icon.

4)Right-click on the printer driver icon and select Printing Preferences.

5)Change the settings on each tab, click OK.

6-28

Xerox Phaser 3200MFP

Page 108
Image 108
Xerox manual Using Windows PostScript Driver Phaser 3200MFP/N Only, Printer Settings