2 Getting Started

Installing the Print Cartridge

1.Open the front door.

2. Remove the Print Cartridge from its bag and remove the paper protecting the cartridge by pulling the packing tape.

3.Thoroughly rock the cartridge 5 or 6

times to distribute the toner. This will loosen the toner and make sure that you get the maximum copies from the cartridge.

NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

CAUTION: To prevent damage, do not expose the Print Cartridge to light for more than a few minutes. Cover it with a piece of paper if left exposed for more than a few minutes.

CAUTION: Do not touch the green underside of the Print Cartridge. Use the handle on the cartridge when lifting the cartridge to avoid touching this area.

2-4

Xerox Phaser 3200MFP

Page 36
Image 36
Xerox 3200MFP manual Installing the Print Cartridge