Xerox 3200MFP manual Paper. Paper Specifications on, Scatter

10 Troubleshooting

Condition Suggested solutions

Background	Background scatter results from bits of toner randomly
scatter	distributed on the printed page.
A	The paper may be too damp. Try printing with a different
	batch of paper. Do not open packages of paper until
	necessary so that the paper does not absorb too much
	Ifmoisture.background scatter occurs on an envelope, change the
	printing layout to avoid printing over areas that have
	overlapping seams on the reverse side. Printing on seams
	can cause problems.
	If background scatter covers the entire surface area of a
	printed page, adjust the print resolution through your
	software application or the printer properties.

Misformed	If characters are improperly formed and producing hollow
characters	images, the paper stock may be too slick. Try a different
	paper. Paper Specifications on page 11-6.
	If characters are improperly formed and producing a wavy
	effect, the scanner unit may need service. For service,
	contact a service representative.

Page skew

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc

Curl or wave

Wrinkles or creases

Ensure that the paper is loaded properly.

Check the paper type and quality. Paper Specifications on page 11-6.

Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack.

Ensure that the paper is loaded properly.

Check the paper type and quality. Both high temperature and humidity can cause paper curl. Paper Specifications on

page 11-6.

Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray.

Ensure that the paper is loaded properly.

Check the paper type and quality. Paper Specifications on page 11-6.

Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray.

10-20 Xerox Phaser 3200MFP