Xerox 3200MFP manual Making Copies from the Automatic Document Feeder

5 Copying

NOTE:

•You can cancel the copy job during an operation. Press Stop/Clear, and the copying will stop.

•Dust on the document glass may cause black spots on the printout. Always keep it clean. See Cleaning the Scan Unit on page 9-5.

•To get the best scan quality, especially for colored or gray-scaled images, use the document glass.

Making Copies from the Automatic Document Feeder

1.Load the document face up

into the ADF (Automatic Document Feeder). You can insert up to 30 sheets at a time. Make sure that the bottom of the document stack matches the paper size marked on the document tray.

NOTE: Copies up to 8.5 x 14 can be made from the ADF (Automatic Document Feeder)

2.Adjust the document guides

to the document size.

3. Select the copy settings including number of copies, copy size, brightness, and original type, by using the control panel buttons. See Selecting Copy Options on page 5-5.

4. To clear the settings, use the Stop/Clear button.

5. If necessary, you can use special copy features, such as Collate and 2 or 4 Up copying.

6.Press Start to begin copying.

The display shows the copy processing.

NOTE: Dust on the ADF glass may cause black lines on the printout. Always keep the ADF glass clean. See Cleaning the Scan Unit on page 9-5.

5-4 Xerox Phaser 3200MFP