Xerox 3200MFP manual Envelopes, Minimum Maximum

11 Specifications

Envelopes

Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:

•Weight: The weight of the envelope paper should not exceed 20 lb (75 g/ m2) or jamming may occur.

•Construction: Prior to printing, envelopes should lie flat with less than 0.25 inches (6 mm) curl, and should not contain air.

•Condition: Envelopes should not be wrinkled, nicked or otherwise damaged.

•Temperature: You should use envelopes that are compatible with the heat and pressure of the machine.

•Size: You should only use envelopes within the following size ranges.

Minimum	Maximum
3 x 5 in.	8.5 x 14 in.
(76 x 127 mm)	(216 x 356 mm)

NOTE:

•Load only one envelope at a time to print envelopes.

•You may experience some paper jams when using any media with a length less than 5.5 in. (140 mm). This may be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly. Please refer to Paper Storage Environment on page 11-10..

Xerox Phaser 3200MFP 11-11