Musical Fidelity manual Amplifier Specifications, Supercharger 750K, Page 10 of

Supercharger 750K AMPLIFIER SPECIFICATIONS

Output:	Power		750 Watts into 8 Ohms (29dBW),
			1150 Watts into 4 Ohms
	Voltage, RMS		78 Volts 20Hz to 20 kHz
	Voltage, Peak-to-peak		222 Volts
	Current peak-to-peak		260 Amps
	Damping factor		220
	Output devices		20
	Thermal cut out (internal temp)		70ºC
Line inputs:	[Balanced and RCA]		< 0.010%
	THD + noise, 20Hz to 20 kHz
	Signal / noise ratio		> 120dB ‘A’-weighted
	Input sensitivity for 750 Watts		2.5V
	Input impedance		50k Ohms
Speaker input:	Frequency response		20Hz to 30 kHz, +0, -0.2dB
	Signal / noise ratio		> 115dB ‘A’-weighted
	Input sensitivity for 750 Watts		35V
	Input impedance		50 Ohms
Connections:
	Line level inputs:		1 line level RCA connector
	Balanced inputs:		1 line level XLR DIN socket
	Speaker inputs:		1 pair 4mm banana plug/binding posts
	Speaker outputs:		2 pairs 4mm banana plug/binding posts
	Power requirement:		100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
			1350 Watts maximum into 8 Ohms, 53 Watts idle
Weight:	17.2 kg,	37 ¾ lbs	unit only, unboxed
	19.5 kg,	43lbs	in shipping carton
Dimensions:	215 mm, 8½ inches diameter
	560 mm, 22 inches high including feet
	220 mm, 8¾ inches deep (front to back) including terminals
Standard accessories:			IEC type mains lead (10-Amp type),
			Speaker lead
			Spiked feet (3 off)

Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.

Issue 3

Page 10 of 11