5 Copying

1 2

3

1 2

3

Collation Copying

This special copy feature is available only when you load documents in the ADF.

1.Load the documents to be copied in the ADF.

2.Press Favorite Copy until “Copy Collate” appears on the bottom line of the display and press Enter.

3.If necessary, customize the copy settings, including Lighten/Darken and original type, by using the control panel buttons. See “Selecting Copy Options” on page 5-5.

4.Press Start to begin copying.

A

Auto Fit Copying

This special copy feature can be applied only when you place a document on the document glass. If a document is detected in the ADF, Auto Fit copying does not work.

1.Place the document to be copied on the document glass, and close the cover.

2.Press Favorite Copy until “Auto Fit” appears on the bottom line of the display and press Enter.

3.If necessary, customize the copy settings, including Lighten/Darken and original type, by using the control panel buttons. See “Selecting Copy Options” on page 5-5.

4.Press Start to begin copying.

NOTE: You cannot adjust the copy size using the Reduce/Enlarge button while Auto Fit copying is enabled.

5-8

Xerox Phaser 3200MFP

Page 76
Image 76
Xerox 3200MFP manual Collation Copying, Auto Fit Copying