JVC TM-H1750CG CONTROLS AND FEATURES cont’d,  SDI INPUT CARD OPTIONAL IF-C01SDG, Rear View

1-4

CONTROLS AND FEATURES (cont’d)

REAR VIEW

<Rear Panel>

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL)

COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG)

TM-H1750CG

To AC outlet (120 V AC,

50 Hz/60 Hz)

To AC outlet (230 V AC,

50 Hz/60 Hz)

25

For U.S.A. and Canada

25

For Europe

25

For the United Kingdom

SLOT
REMOTE
VIDEO A
VIDEO B
Y/C
AUDIO A
AUDIO B
24	23

G / Y

INOUT

B/P B /B-Y

INOUT

R/P R /B-Y

INOUT

HD/C S

INOUT

VD

INOUT

AUDIO

IN OUT

1

2

3

4

1 Video input/output terminals
Input (IN) and output (OUT) terminals for component
(color deference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT C button
Select RGB signal	: press INPUT SELECT D button

2 Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronized signals.
The synchronized signals from these terminals have
priority over other terminals. When no synchronized signal
is input to these terminals, the synchronized signal from
the video input/output terminals (G/Y terminals) is valid.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
External sync is available with RGB input only.	G on
SYNC cannot be used with RGB input.

23 Main power switch

25 Power cord

 Compatible signal formats:	3	Audio input/output terminals
480/50i, 480/60i		Input (IN) and output (OUT) terminals for audio signals.
		The IN and OUT terminals are bridge-connected.

4 Connection terminal (to a Color Video Monitor)

ENGLISH

No.51923

Press the switch to turn the main power ON or OFF. When the main power is ON, the power lamp on the front panel lights in orange and the monitor enters the stand-by mode.

I : ON  : OFF

24 AC inlet [AC IN]

Power input connector. Connect the provided AC power cord t to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).

Connects the provided power cord (120 V AC or	r.
230 V AC, 50 Hz/60 Hz) to the AC IN connector
Caution:
In North America (USA and Canada), this monitor comes
with one power cable. In Europe and the United King-
dom, two power cables are provided (one for use in
continental European countries and the other for the UK).
Be sure to use the power cable that is appropriate for the
AC outlets used in your region. If none of the power

Attach to the connection terminal of your color video monitor.

SDI INPUT CARD (OPTIONAL: IF-C01SDG)

1 Output terminal for a selected component serial digital signal

cables provided is suitable, please contact your dealer or

qualified service personnel to obtain the correct type of

power cable.

SWITCHED

OUT
IN	SDI 1
IN	SDI 2
AUDIO1
IN	OUT

AUDIO2

1

2

3

4

Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated.

NOTE: When the monitor’s main power is OFF, no digital signal is output.

In the standby mode, signals from the SDI 1 connector are output.

2 Input terminals for component serial digital signals

Input terminals for the digital signal.

Select SDI 1 : press INPUT SELECT C button

Select SDI 2 : press INPUT SELECT D button

3 Audio input/output terminals

Input (IN) and output (OUT) terminals for the analog signals corresponding to SDI 1 and SDI 2.

Compatible signal formats: 480/60i, 480/50i

Note:

●The optional input cards shown below cannot be used. Using any of these cards will void your warranty and may result in damage or malfunction.

*Video input card (IF-C01PNG) *HD-SDI input card (IF-C01HSDG)

NOTE: This input card cannot decode audio data even if contained in the input digital signal.

4 Connection terminal (to a Color Video Monitor)

Attach to the connection terminal of your color video monitor.

6 7