2. Installation
2.8.2 Specifications
Part Number | applicom |
|
|
Modes | Master/Slave |
|
|
Baud Rates | 9.6, 19.2, 93.75, 187.5, 500, 1500, 3000, 6000, 12000 kbps |
|
|
Interface | 1 PROFIBUS port (EN 50 170) |
|
|
Output Current Capacity | Maximum 150mA |
|
|
Supported Devices | All DP Devices |
|
|
Maximum Stations | 126 (32 per segment) |
|
|
GDS Support | Yes |
|
|
PROFIBUS DP Class 1 | Yes |
|
|
PROFIBUS DP Class 2 | Yes |
|
|
Input Data Size | 1 to 244 bytes |
|
|
Output Data Size | 1 to 244 bytes |
|
|
Automatic Detection | Yes. Devices can be detected automatically. |
|
|
2.8.3 Software Installation
Before installing any boards in your controller, you must install the applicomIO console application and drivers for the type of board you will be using.
(1)Start the controller.
(2)Run the C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE from the install folder in the controller to start the installation.
(3)Select the desired language for the installer.
(4)Select Install Products.
(5)Select applicomIO. Do not select applicomIO ActiveX.
42 | Fieldbus I/O Rev.6 |
