2. Installation
2.7.2 Specifications
Part Number | applicom |
Modes | Master/Slave |
Baud rates | 125, 250, 500 kbps |
Interface | 1 DeviceNet port |
Supported Devices | Group 2 Only Server and U.C.M.M. capable |
Maximum Nodes | 63 |
Connection Types | Strobe, Polling, Cyclic and Change of State |
Explicit Messaging | Yes |
EDS Support | Yes |
Input Data Size | 1 to 255 bytes |
Output Data Size | 1 to 255 bytes |
Automatic Detection | Yes. Devices can be detected automatically. |
2.7.3 Software Installation
Before installing any boards in your controller, you must install the applicomIO console application and drivers for the type of board you will be using.
(1)Start the controller.
(2)Run the C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE from the install folder in the controller to start the installation.
(3)Select the desired language for the installer.
(4)Select Install Products.
(5)Select applicomIO. Do not select applicomIO ActiveX.
Fieldbus I/O Rev.6 | 27 |
