2. Installation
(7) Select the protocol: Ethernet you will be using.
If you also use DeviceNet, select DeviceNet as well. If you also use PROFIBUS DP,
select Profibus-DP as well.
Select which type of device data files to install (GSD for PROFIBUS DP, EDS for
DeviceNet).
(8) Complete the installation.
(9) The message to ensure the restart appears. Click the Yes button.
(10) Start the C:\Install\FieldBus\Install\SP\Setup.EXE and install the service pack.
No installation is necessary when a service pack is not attached to controller.
(11) After completing the installation of the service pack, shutdown the computer.
(12) Proceed to 2.9.4 Board Installation.
56 Fieldbus I/O Rev.6