Epson EM07ZS1647F manual Master Mode

2. Installation

2.9.5 Master Mode

(1)Ensure that the board is connected to the fieldbus. Then, start the applicomIO console application.

(2)Register the device information (EDS file) that is necessary for the network setup. Select the [Equipment Library] tab at the center of the dialog’s right side and click the Add icon.

(3)Following dialog appears. Register the EDS file that is supplied from the device manufacturer.

(3)-1 Click Next button.

(3)-2 Specify the folder that EDS is stored, and click the Next button.

60 Fieldbus I/O Rev.6