Epson EM07ZS1647F manual General Specifications, Electrical Specifications

1. Introduction

General Specifications

Electrical Specifications

Item			Specification
Supply Voltage	5 V DC (supplied from a controller)
Power Consumption	7 W
Ambient Temperature	5-40 deg C
Relative Humidity	20-80%
DeviceNet Communication Specifications
Item			Specification
Supported Connection	- I/O messaging connection
	(Polling, Strove, Cyclic, Change of State)
	- Explicit messaging connection
	All connections are conformed to DeviceNet communication
	protocol.
Baud Rates	125 kbps, 250 kbps, 500 kbps
Transfer Distance	Baud Rates		Max. Network	Drop Length	Total Drop
			Length		Line Length
	500 kbps		100 m	6 m or under	39 m or under
	250 kbps		250 m *	6 m or under	78 m or under
	125 kbps		500 m *	6 m or under	156 m or under
Maximum Nodes	64 (including	master unit)
Data Length / Frame	8 byte (The data can be divided and transferred.)
Bus Access	CSMA/NBA
Error Detection	CRC error / Duplicate node address check
Cable	5-wire cable dedicated to DeviceNet (2 wires for signal,
	2 wires for power supply, 1 shield wire)
Communications	24 V DC (supplied from a connector)
Power Supply Voltage

* When thin cable is used for trunk line, the maximum network length is 100 m.

4 Fieldbus I/O Rev.6