2. Installation
$ EDS File Generated by applicomIO® Console Version : 2.2
[File] | = "EDS for applicomIO Scanner"; |
DescText | |
CreateDate | = |
CreateTime | = 08:14:41; |
ModDate | = |
ModTime | = 08:14:41; |
Revision | = 1.0; |
[Device] | = 579; |
VendCode | |
ProdType | = 12; |
ProdCode | = 1; |
MajRev | = 1; |
MinRev | = 2; |
VendName | = "applicom international"; |
ProdTypeStr | = "Communication Adapter"; |
ProdName | = "applicomIO Scanner"; |
Catalog | = ""; |
[IO_Info] | = 0x0000; |
Default |
Copy the EDS file to the system where the master is located. Add the new slave device to the master using the new EDS file.
(12)On the master system, scan the network for new devices. The new slave device should be detected.
Use the EDS file created in previous steps for the slave device.
40 | Fieldbus I/O Rev.6 |
