GB
Setting the time 
The real time is shown on the clock, the 4 digits at the bottom of the LCD.
The moment the unit is connected to the electricity, the default time 12:00 is shown. Push the SET BUTTON for 2 seconds, the 2 left digits will blink, adjust the hour by pressing the 
or 
button repeatedly.
To set the minutes push the SET BUTTON again for 2 seconds. The 2 right digits blink. Press the 
or 
button repeatedly to adjust the minutes.
Push the SET BUTTON again and the real time is set.
Switching the unit ON and OFF
Push the 
BUTTON to operate the dehumidifier. Pushing the button again will switch the unit off.
Setting the humidity level 
CONT = Continuous dehumidification, the unit is dehumidifying disregarding the relative humidity in the room.
50% maintains the relative humidity around 50%, ideal for personal comfort and dry storage.
60% maintains the relative humidity around 60% for personal comfort.
70% maintains the relative humidity around 70% in the room.
80% maintains the relative humidity around 80% in most cases the compressor will be OFF.
To set the desired relative humidity level press the 
or 
button repeatedly.
Setting the fan speed.
Push the SPEED BUTTON to change the fan speed, the chosen speed will be indicated
on the LCD, 
for the high speed and 
for the low speed.
Setting the Timer 
The timer switches the unit on and off automatically.
Make sure that the clock is set to the real time so that the timer can operate the unit accurately.
When the unit runs (is ON)
Push the TIMER BUTTON, the 2 left digits will blink; adjust the desired hour when the unit will switch OFF by repeatedly pressing the 
or 
button.
Push the TIMER BUTTON again, the 2 right buttons will blink; adjust the minutes by repeatedly pressing the 
or 
button. (The minutes can be set in steps of 5 minutes, 5, 10, 15 up to 55 ).
If an ON setting is desired after the OFF, repeat the above procedure.
To activate the timer settings push the SET BUTTON one more time.
9
