GB
TROUBLE SHOOTING
Never try to repair or dismantle the unit yourself. Before calling for assistance please check the points below.
The unit doesn’t run. | Is the machine plugged in? |
| Is the mains power supply on? |
| Is the water tank full indicator on? (If so, the water tank is full or it isn’t |
| positioned properly). |
The unit seems to | Are too many windows or doors open? |
extract little water. | Is there something in the room producing lots of heat? |
| Is the room cold – the colder the air the less moisture the unit will extract. |
| Is the filter dirty? |
| Is the room humidity already quite low? |
The unit seems to do | Is the filter dirty? |
nothing. | Is the air intake or outlet blocked? |
| Is the room humidity already quite low? |
| Is the room temperature below 5 °C? The fan may run without the compressor. |
Too noisy. | Is the machine positioned unevenly so as to create vibration? |
| Is the floor underneath the unit uneven or loose fitting? |
| Is there any foreign body interfering with the unit? |
The unit’s fan doesn’t | Is the filter blocked? |
seem to be revolving. | Is there any foreign body interfering with the unit? |
The continuous | Does the hose have a downward slope throughout its entire length? |
drainage is not working. | Is there a kink or sharp bend in the hose? |
TECHNICAL DATA
Model |
| PLDA 19EH |
| PLDA 25EH |
|
|
|
| |
Mains |
| 220 - 240 V / 50 Hz | ||
|
|
|
|
|
Power consumption | W | 300 |
| 390 |
(at 32 °C, RH 90 %) |
| |||
|
|
|
| |
|
|
|
|
|
Heater | W |
| 600 | |
|
|
|
|
|
Moisture removal | L/24h | 18 |
| 24 |
(at 32 °C, RH 90 %) |
| |||
|
|
|
| |
|
|
|
|
|
Refrigerant |
|
| ||
|
|
|
| |
Refrigerant load | g | 155 |
| 200 |
|
|
|
|
|
Working temperature | °C |
| 5 - 35 | |
|
|
| ||
Dimensions (W x D x H) | cm | 42 x 24 x 60 | ||
|
|
|
| |
Net weight | kg | 16 |
| 16.5 |
|
|
|
|
|
Due to our continuous R+D program, specifications may change without prior notice.
For current specifications please refer to the rating label on your machine.
14