Starting from a Desired Time Count, Marker

1 2 3 4 5 AC NOT SET

STARTING FROM A DESIRED

TIME COUNT

DVD CD

1Press the SEARCH MODE button twice.

2Press the numeric buttons to set the desired time count.

¡Example: 1 hour, 23 minutes and TIME 1:23:30

TOTAL 1:29:00

30 seconds

1 → 2 → 3 → 3 → 0

Notes

¡In the case of DVD, Time Search in Title is effective. (But Time Search in Chapter is ineffective.)

¡In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective.)

¡Playback from a desired time count is not available with some discs or if the unit is in stop mode.

¡If wrong numbers are entered, press the CLEAR but- ton and re-enter the correct numbers.

MARKER

DVD CD

You can define the part to be called back.

1Press the SEARCH MODE button three times during playback.

Set the marker

¡Using the cursor (s / B) button, position the cursor on to the marker number shown as “NOT SET”. Press the ENTER button when the screen to be reviewed appears. The marked

time will be displayed. Up to 5 points can be marked.

Call back the marker

¡Using the cursor (s / B) button, position the cursor on to the marker number to be called back and press the ENTER button.

Clear the marker

¡Using the cursor (s / B) button, position the cursor on to the marker number to be cleared and press the CLEAR button.

To clear all markers, place the cursor on “AC” (All clear markers) and press the ENTER button.

2Press the SEARCH MODE button or the RETURN button to exit the display.

RANDOM (Audio CD)

1Press the MODE button in stop mode.

¡The program setting menu screen will appear.

2Press the MODE button again.

RANDOM

START : PLAY EXIT : MODE

3Press the PLAY button. Random playback will then start.

Note

¡Program playback is not available during random playback.

– 16 –

1A23