JVC AV 36FA54 manual Remote Programming, Setting the CATV, VCR and DVD Codes

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation.

1)Find the cable box or satellite brand from the list of codes shown below.

2)Slide the 2-way selector switch to “CATV”.

3)Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.

4)Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

•If your cable or satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the search codes function, on page 22.

19