Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 18 as the interactive
Press the MENU button π† To AUTO TUNER SETUP √® To operate
è To choose CABLE or AIR
†To move to START √® To start Auto Tuner Setup
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � � �
� � � � � � � � � �� � � � �
� � � � �
� � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � �
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the
Press the MENU button π† To CHANNEL SUMMARY √® To operate
The Channel summary screen will now be displayed with the channels set to scan marked with an “¸”. You can delete channels from the scan by removing the “¸”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “¸” next to the channel number.
π† To the SCAN column
è To include or delete from scan Press the EXIT button when finished
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � �
� � � � � � � � � � � | � � � � � � � � � � � | |
� | � � | � |
� | � � | � |
� | � � | � |
� | � � | � |
� | � | � � |
� � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � �
You can block access to a channel by activating the channel lock. Press the MENU button
π† To CHANNEL SUMMARY √® To operate
π† To the Lock Column ( )
Press the ZERO button to lock or unlock that channel Press the EXIT button when finished
25