To add in the new channel Insert in the Edit menu

TV channel presetting (continued)

To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)

You can edit the TV channel list as you like.

Note: After this operation, other channel’s PR numbers will be changed.

1Display the INSTALL menu.

❇ MENU INSTALL menu

2Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears.

EDIT

PRCH/CC

7CH 09

8CH 11

	9 ■	CH 13	3
10
11
12
13
BACK ■			■INSERT
	OK	MOVE	■DELETE
			■MANUAL

3Choose the channel which you want to change PR number, or delete.

4Do the following action:

To change the PR		Press the 3 button. Then move it to the PR
number (MOVE)		number you want to use it for the channel.
		Finally press the 2 button.
	To delete the	Press the yellow button.
channel (DELETE)

5Press the MENU/OK button to exit the menu.

To add in the new channel (INSERT in the EDIT menu)

You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on page 21.

1Display the INSTALL menu.

❇ MENU INSTALL menu

2Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears.

3Choose the PR number for which you will register a new TV channel. When you add a new TV channel of NTSC-M system, press the SOUND SYSTEM button to change the sound system to M. Then proceed to the next step.

4Press the green button, then press 5/∞ buttons to choose “CC” or “CH”.

5Press the number button to enter the remaining CH/CC number.

The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy

picture appears.

When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel.

❇About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.