GE
Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you can operate your remote control, you first need to install the batteries (included).
Lift and pull the latch on the back of the remote to open. Insert two batteries (included) carefully noting the “+” and
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of the remote.
The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward an back through the available chan- nels. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are also used with JVC's onscreen menu system. You will need to use these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
Note: Illustration of remote control
POWER
10 | Proceed to Step Two " |
|