4.6BASIC OPERATION IN SERVICE MENU
Operate the SERVICE MENU with the remote control unit.
4.6.1 SERVICE MENU ITEMS
With the SERVICE MENU, various settings (adjustments) can be made, and they are broadly classified in the following items of settings:
1. | IF | For entering/adjusting the setting values (adjustment values) of the IF circuit. |
2. | V/C | For entering/adjusting the setting values (adjustment values) of the VIDEO circuit. |
3. | AUDIO | For entering/adjusting the setting values (adjustment values) of the AUDIO circuit. |
4. | DEF | For entering/adjusting the setting values (adjustment values) of the DEFLECTION circuit. |
5. VSM W/B | For setting the values of STANDARD, SOFT, BRIGHT and COOL, NORMAL, WARM. | |
6. | STATUS | This is not used for service. |
7. | PLUG & PLAY (ON) | This is not used for service. |
4.6.2 BASIC OPERATION IN SERVICE MENU
1.HOW TO ENTER SERVICE MENU
Press the [DISPLAY] key and the [PICTURE MODE] key on the remote control unit simultaneously. The SERVICE MENU screen will be displayed. (See Fig. 1 on the next page.)
2.SELECTION OF SUB MENU SCREEN
Press one of the keys 1 to 6 on the remote control unit, and select the SUB MENU SCREEN from the SERVICE MENU. (See Fig.1 on the next page.)
SERVICE MENU → | SUB MENU |
1. IF | 5. VSM W/B |
2. V/C | 6. STATUS |
3. AUDIO | 7. PLUG & PLAY (ON) |
4.DEF
3.METHOD OF SETTING NOTES:
•Once the setting values are set, they are memorized automatically.
•It must not be adjusted without inputting a signal.
(1)1. IF
[1.VCO ] : Under normal conditions, no adjustment is required.
| (a) [1] key |
|
| Select 1. IF. |
| (b) [1] key |
|
| Select 1. VCO. |
| (c) [DISPLAY] key |
| When this is pressed twice, you will return to the SERVICE MENU. | |
| [2.DELAY POINT ] |
|
| |
|
|
|
|
|
| (a) [1] key |
|
| Select 1. IF. |
| (b) [2] key |
|
| Select 2. DELAY POINT. |
| (c) MENU [ | ] / [ | ] key | Adjust the setting value. |
| (d) [DISPLAY] key |
| When this is pressed twice, you will return to the SERVICE MENU. | |
(2) 2. V/C, 3. AUDIO and 4. DEF |
| |||
|
|
|
| |
| (a) [2] ~[4] keys |
| Select one from 2. V/C, 3. AUDIO and 4. DEF | |
| (b) MENU [ | ] / [ | ] key | Select setting items. |
| (c) MENU [ | ] / [ | ] key | Adjust the setting values of the setting items. |
|
|
|
| Use the number keys on the remote control unit for setting the WHITE BALANCE. |
|
|
|
| For the setting, refer to each item concerned. |
| (d) [DISPLAY] key |
| When this is pressed, you will return to the SERVICE MENU. | |
(3) 5. VSM W/B |
|
|
| |
|
|
|
|
|
| (a) [5] keys |
|
| Select 5. VSM W/B. |
| (b) MENU [OK] key | Select preset items. | ||
| (c) MENU [ | ] / [ | ] key | Adjust setting items. |
| (d) MENU [ | ] / [ | ] key | Adjust the setting values of the setting items. |
| (e) [DISPLAY] key |
| When this is pressed, you will return to the SERVICE MENU. | |
(4) 6. STATUS
This is for display only.
(5)7. PLUG & PLAY (ON) This is not used for service.
4.Release of SERVICE MENU
After completing the setting, return to the SERVICE MENU by pressing the [DISPLAY] key, then again press the [DISPLAY] key to return to the normal screen.