JVC AV-29V514/B „ Video 2 SET Component, VSM Preset Setting, Vsm, Bright Standard Soft, Drive

„VIDEO - 2 SET: COMPONENT

Item	Measuring		Test point			Adjustment part		Description
	instrument
H. POSITION	Signal				[4. DEF]		(1) Receive a PAL circle pattern signal to VIDEO-2
adjustment	generator				4. H-CENT			component terminal.
	Remote						(2)	Select VIDEO-2 SET from the MENU and set
								VIDEO-2 SET to COMPONENT.
	control unit						(3)	Select 4. DEF from the SERVICE MENU.
							(4)	Select 4. H-CENT.
		C		D			(5)	Set the initial setting value of 4. H-CENT.
							(6)	Adjust 4. H-CENTto make "C=D".
							(7)	Press the [DISPLAY] key twice to return to the
								normal screen.

4.7.7 VSM PRESET SETTING

Item		Measuring	Test point		Adjustment part				Description
		instrument
VSM	Remote				[5. VSM W/B]	(1)		Select 5. VSM W/B from the SERVICE MENU.
PRESET	control unit				1. BRIGHT	(2)		Select BRIGHT with the MENU [OK] key.
setting					2. CONT	(3)		Set the value of 1. BRIGHT ~ 5. HUE to the values
					3.COLOUR			shown in the table.
					4. SHARP	(4)		Respectively select the VSM PRESET mode for
					5. HUE			SOFT and STANDARD.
					1. R-DRIVE	(5)		Select COOL with the MENU [OK] key.
					2. G-DRIVE	(6)		Set the values of 1. R-DRIVE~ 3. B-DRIVEto the
					3. B-DRIVE			value shown in the table.
						(7)		Select the W/B preset for WARM and NORMAL,
		SUB MENU 5. VSM W/B						respectively.
						(8)		Press the [DISPLAY] key twice to return to the
		VSM PRESET BRIGHT						normal screen.
		1. BRIGHT		***			[Setting Values for SUB 5. VSM W/B]
								VSM preset	BRIGHT	STANDARD	SOFT
							Setting item
							1.BRIGHT		0	0	+2
							2. CONT		+15	0	-3
							3. COLOUR		0	0	0
							4. SHARP		0	0	-10
							5. HUE		0	0	0
								W/B preset	COOL	NORMAL	WARM
							Setting item
							1. R-DRIVE		0	+2	+10
							2. G-DRIVE		0	0	-4
							3. B-DRIVE		0	-10	-12

1-28 (No.YA139)