B U T T O N F U N C T I O N S 
17
RETURN+
There are two kinds of Return.
Return+ — Set a “Return Channel” to return to after scanning with CHANNEL 
.
RETURN+ and hold for 3 seconds
RETURN CHANNEL
PROGRAMMED !
Scan with CHANNEL
RETURN+
PICTURE BOOSTER
You can select the sharpness of picture when receiving RF.
PICTURE BOOSTER
> OFF | > HIGH | > LOW > |
OFF: The Picture Booster off. (Standard)
HIGH: The Picture Booster is functioning at maximum.
LOW: The Picture Booster is functioning at minimum.
Note: To cancel a Return channel, press and hold the RETURN+ button for another 3 seconds until “Return Channel Cancelled !” appears.
Return — Return to the last channel viewed after moving to another chan- nel via the 10 key pad.
RETURN+
Move to another channel with the 10 key pad.
Note: If the picture becomes abnormal when you set the Picture Booster to HIGH, then set it to LOW or OFF.
RETURN+