JVC AV29A10EU Press the green button and start the IN- Sert function, Register a new TV channel

INSTALL

2Press the green button and start the IN- SERT function.

EDIT

PR	ID	CH / CC
AV	BBC1
01		CH	21
02		CH	22
03		CH	23
04		CH	24
05		CH	25
06		CH	26
07		CH
08		CC	02
09		CC	03

BACK

TV OK 0 9

CH / CC

D0034-EN

3Press the 6 buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel.

When the COUNTRY setting is FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

To cancel the INSERT function:

Press the h(Information) button.

4Press the Number buttons to enter the re- maining CH/CC number.

The TV shifts to registration mode.

When the registration is completed, the picture of the TV channel appears on the screen.

Note:

•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot de- tect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a pic- ture in the no-signal state appears.

DELETE

1 Press the 6 buttons to choose a TV channel.

Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) ap- pears on the screen.

2Press the yellow button to delete the TV channel.

The TV channel is deleted from the Programme num- bers (PR) list.

MANUAL

Preparation:

•As long as you register the TV channel (SECAM-L system) from a French station, be sure to set the COUNTRY setting to FRANCE. If the COUNTRY setting is not FRANCE, follow the description “Changing the COUNTRY setting” on page 28 to change the COUNTRY setting to FRANCE, then start the MANUAL function.

2Press the blue button to activate the MAN- UAL function.

At the right side following the CH/CC number, the SYS- TEM (broadcasting system) of the TV channel appears.

MANUAL

PR		ID	CH / CC
AV		BBC1
01			CH	21
02			CH	22
03			CH	23
04			CH	24
05			CH	25
06			CH	26
07			CC	01	(B / G)
08			CC	02
09			CC	03
	BACK				SEARCH+
					SEARCH-
TV		OK			FINE+
D0035-EN		SYSTEM			FINE-

To cancel the MANUAL function:

Press the h (Information) button.

3Press the 3 button to choose the SYSTEM (broadcasting system) for a TV channel you want to register.

TV channel (SECAM-L system) from a French station:

Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the SECAM-L sys- tem.

Other TV channels:

If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.

4Press the green or red button to search for

a TV channel.

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

5Press the green or red button repeatedly until the TV channel you want appears.

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV chan- nel.

If you cannot hear the normal sound even when the picture of the TV channel appears normal- ly:

The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound.

6Press the a button and register the TV

channel to a Programme number (PR).

The normal EDIT menu is resumed.

1Press the 6 buttons to choose a Pro- gramme number (PR) to which you want to

26register a new TV channel.