JVC AV29A10EU manual Preparation, Connecting the Aerial and VCR

PREPARATION

■Connecting the Aerial and VCR

If connecting a VCR, follow A → B → C . If not connecting a VCR, follow 1.

To operate T-V LINK functions, a T-V LINK compatible VCR must be connected to the EXT-2 terminal on the TV. For de- tails about T-V LINK functions, see “T-V LINK FUNCTIONS” on page 5.

Note:

•For further details, refer to the manuals provided with the devices to be connected.

•The connecting cables are not provided.

•A video can be viewed from the VCR without performing C. For details, refer to your VCR instruction manual.

•To connect additional external devices, please see “AD- DITIONAL PREPARATION” on page 31.

•To connect speakers and amplifier, please see “Con- necting Speakers/Amplifier” on page 32.

•When a decoder is connected to a T-V LINK compatible VCR, set the DECODER (EXT-2)function to ON. For de- tails, see “Using the DECODER (EXT-2) function” on page 29. Otherwise, you will not be able to view scram- bled channels.

Aerial

Back of the TV 75-ohm

Coaxial

Cable

EXT-2EXT-3

SS

L

R

EXT-1

AUDIO OUT

	75-ohm
21-pin SCART	Coaxial
	Cable
Cable

VCR	To Aerial
	Input

AV IN/OUT

Terminal

To Aerial Output

■Connecting the power cord to the AC outlet

Caution:

•Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.

■Putting Batteries into the Remote Control

Use two AAA/R03 dry cell batteries.

Insert the batteries from the - end, making sure the + and - polarities are correct.

To open the battery compartment, slide the door downwards and lift off. Replace the door by sliding it upwards until it is secure.

Note:

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending on your frequency of use.

•If the remote control does not work properly, replace the batteries.

•The batteries we supply are only for setting up and test- ing your TV, please replace them as soon as necessary.

•Always use good quality batteries.

2