JVC AV-30W585, AV-30W575, AV 30W575 manual Connecting to JVC AV CompuLink, AV Compu Link Cable

Quick Setup Connections

Connecting to JVC AV CompuLink

Note: AV-30W585 ONLY

JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input.

•The AV CompuLink cable may be included with the JVC AV CompuLink unit you wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or www.jvcservice.com for part # EWP 805-012.

•AV CompuLink can only be used with JVC brand products.

AV Compu Link Cable

TV Rear Panel

AV

COMPULINK

To Connect: Plug one end of the AV CompuLink cable into the AV COMPULINK INPUT on your VCR, DVD, or other CompuLink device. Plug the other end of the AV CompuLink cable into the AV COMPULINK at the rear of the television.

Note:

•The AV CompuLink cable has a male 3.5 mm (mono) plug on each end.

VCR

IN V L R

IN

OUT

OUT

AV CompuLink

Notes:

•In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s Play button.

•If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s instruction book), using VCR A code will switch the TV to input 1.

•Refer to your DVD instruction book for detailed connection information.

•To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the receiver connection instructions for detailed connection information.

•AV CompuLink is compatible with select AV CompuLink receivers.

16